Recent Posts

Why your Fridge Keeps Beeping and How to Stop it

Written by Ernie Lo in Appliances Last Updated October 2, 2022

Why does my fridge keep beeping?

The main reason why a fridge keeps beeping is because it’s the temperatre is too warm, the fridge is overfilled or a there is a buildup of ice in the freezer compartment.

 

  • Too warm or too cold
  • Overfilling of fridge compartments
  • Imbalance of the fridge
  • Ice buildup in the freezer
  • Problems with the circuit board or door seals
  • Pending reset

 

As mentioned above, the fridge may also beep if it has ice buildup in the freezer or problems with the circuit board or door seals. A pending reset can also trigger the beeps from the fridge.

 

Too warm or too cold

If the fridge and/or freezer are either too warm or too cold, it tends to start beeping. You can use a thermometer to measure their temperatures and adjust them accordingly.

 

Overfilling of fridge compartments

Overfilling is a common reason for the beeps. If the fridge and/or freezer compartments are overstuffed, their doors may not close properly or the airflow tends to get obstructed resulting in the beeping sound.

 

Imbalance of the fridge

The fridge is less likely to be balanced if it isn’t placed on a level surface. This imbalance can affect the stability of the fridge and make it start beeping.

 

Ice buildup in the freezer

The ice buildup in the freezer is a common problem when the fridge doesn’t support an auto defrost functionality. The beeping will stop automatically when the freezer has been defrosted completely.

 

Problems with the circuit board or door seals

The fridge has chances of beeping if it has problems with the circuit board or a faulty door seal. It’s best to get the assistance of a technician to work on this problem.

 

Pending reset

A simple pending reset might be one reason for the fridge to keep beeping. Like most other appliances, your fridge also often needs a reset from time to time.

 

Fridge is beeping

 

Why does my fridge keep beeping when the door is closed?

Your fridge keeps beeping when the door is closed due to a bad door switch, a faulty door sensor, or an activated buzzer. A condensate drain line or a defective or dirty door seal also causes the fridge to beep with the door closed.

 

Push the small switch in the door frame and see if it turns OFF the light in the fridge. If it doesn’t do this, it has most probably gone bad and you’ll have to change it to stop the beep. Inspect the electrical connection of the door sensor for signs of corrosion and if they appear corroded, get a new sensor fitted. You can also deactivate the buzzer in the rear fridge panel behind the cover plate.

 

Look out for a blocked condensate line at the rear of the freezer due to ice buildup. You will have to unplug the fridge and take out the things inside both the fridge and freezer to go ahead with releasing the block. The whole unblocking process can take up to two hours. Check the door seal for signs of damage or dirt and get it replaced or cleaned accordingly.

 

How to stop a fridge from beeping

You can stop a fridge from beeping by adopting one or more simple techniques. You will often not need any special materials or tools to stop the beeps.

 

The following list mentions some simple methods that you can try to put an end to the beeping sound.

  1. Move the things inside the fridge a little or reposition them so that they aren’t very close to the door and you can close the door properly without any effort.
  2. Inspect the door seal to ensure that it’s intact. If it’s dirty and accumulated with grime, clean it well as the grime can prevent it from functioning properly. Similarly, a broken or cracked seal will also not be able to function as intended. You will have to get it replaced. A door seal is usually not very expensive.
  3. Defrost your freezer manually from time to time if your fridge doesn’t support an auto defrost feature. This will prevent the ice buildup inside the freezer that causes the beep.
  4. Make sure that you keep your fridge on a level surface. All four legs must stay level on the floor. If the fridge is placed on a slope or is unbalanced, its door alarm beeps to indicate something is wrong.
  5. Get the door alarm checked for defects and have it replaced at the earliest. This is usually covered under the warranty offered for the fridge.
  6. Seek professional assistance to check the circuit board of the fridge for damage and get a new one fitted if needed. It’s best to leave this job to the technician as trying to work on it yourself can nullify the fridge’s warranty.
  7. Do a simple reset process by turning OFF the power connection to the fridge and unplugging it for five minutes. After this period, plug it in again and turn ON the power connection.

 

GE fridge error codes

Code Number Meaning Solution
 

 

FF

  

Food in the freezer is thawing because of abnormal freezer temperature.

 ●        Close the freezer and fridge doors properly.

●        Check for damaged door gaskets and get them changed.
 

 

 

PF

  

 

There is no proper power connection.

 ●        Ensure that the power cord has been plugged in properly to the electrical outlet.

●        Change the power cord if it shows signs of fraying or other damage signs.
 

 

CI

  

The ice dispenser isn’t working as intended.

 ●        Remove the ice cubes that are jammed in the ice mold.

●        Check if the ice mold is filling up with water and if not, restore its water supply.
 

 

dE

  

 

There is a problem with the defrost system and it’s more than 48 hours since the defrost took place.

 ●        Turn OFF the power supply to the fridge and reconnect loose wires or wires that have come off in the defrost system.

●        Change the defrost heater and wire harness if they appear damaged.
 

 

 

CC

  

 

 

The freezer is overly warm.

 ●        Adjust the freezer controls as per the instructions specified in the owner’s manual.

●        Close the fridge as well as the freezer doors properly.

●        Check if the door gaskets are damaged and if so, change them.

 

Whirlpool fridge error codes

Code Number Meaning Solution
 

E0

  

The ice maker isn’t working as intended.

 Check if the ice maker has been fixed properly and if not, seek the assistance of a technician.
 

E1

  

The fridge sensor is

malfunctioning or not working properly.

  

Seek the help of a technician to get a new one fitted to avoid the fridge warranty getting affected.
 

E2

 The freezer sensor is at fault, causing the freezer to have an incorrect temperature. Set the freezer to the correct temperature and get the freezer sensor replaced.
 

 

E3

  

 

The fridge temperature is incorrect.

 Check the under-sink plumbing area and drain pipe for blockages and remove the blocks.
 

E4

 The defrost sensor in the fridge is malfunctioning. Get the defrost sensor checked for fault and replace it if needed.
 

E5

  

The defrost sensor in the freezer isn’t working properly.

 Get the defrost sensor checked for defects and replace it if needed.
 

E6

 The controls and display on the fridge aren’t operating properly because of problems with the display board and main control board.  

Book an appointment with the customer service team to look into the problems and take the necessary action.
 

 

E7, E8

  

The fridge has a defective environmental temperature sensor.

 Seek professional assistance to determine what factors are affecting the temperature of the fridge and change the sensor if required.
 

E9

 The freezer has a very high temperature because the door is open and the food has got thawed.  

Close the door of the fridge properly.
 

EE

 There is a problem with the circuitry of the ice maker. Get help from a technician to look into the circuitry and fix it for you.

 

LG fridge error codes

Code Number Meaning Solution
 

IS or 15

 The ice maker sensor is

disconnected or there is a problem with the fan of the ice maker.

  

Get the assistance of a certified technician to fix the problem with the ice maker.
 

22

  

There is a problem with the compressor relay.

 Request the assistance of the service team to resolve the problem for you.
 

 

67

  

The fridge door isn’t closing properly.

 ●        Reposition the items inside the fridge so that the door closes properly.

●        Check for a gap in the door and get help from a technician to seal it for you.
 

CO

 There is a communication error between the display and the control board.  

Seek professional assistance to resolve the problem.
 

dH

  

The freezer takes over one hour to defrost.

 Disconnect the fridge from the power supply for a couple of minutes to reset it and then allow the defrosting to resume.
 

dS

 The defrosting sensor of the fridge or refrigerator is disconnected or has a short. Request a certified technician to look into the problem and fix it for you.
 

IF or F1

  

There is ice buildup or frost around the ice maker fan.

 Disconnect the fridge from the power supply and empty it. Remove the ice from the ice bin and keep the fridge and freezer door open for a minimum of eight hours for defrosting. Wipe the insides of the fridge and freezer dry and plug it back.
 

gF

 There is low water pressure in the fridge or the flow sensor has an error. ●        Raise the water pressure gradually.

●        Get the flow sensor replaced by a technician.
 

rt

 There is a short in the temperature sensor. Seek help from the service team to get the temperature sensor replaced.
rS The fridge sensor is short or disconnected. Request a certified technician to change the sensor for you.

 

Frigidaire fridge error codes

Code Number Meaning Solution
 

SY CE, 5Y CF

 There is a communications error during power up. Check if the wiring between the user interface and control board is intact and not loose. Tighten loose connections.
 

4

 There is a problem with the air damper. Check the air damper for signs of damage and replace it.
 

5Y EF

  

The evaporator fan circuit has failed.

 Check the wiring between the control board and the evaporator fan and get it fixed if it has a problem.
 

dF

  

There is a problem with the defrost circuit.

 Make sure that the wiring between the control board and the defrost circuit is intact and fix loose connections.
 

SH

  

The freezer sensor of the freezer display is shorted.

 Inspect the wiring between the circuit board and the thermistor. If it’s correct, do a thermistor replacement.
 

OP

 The fresh food sensor present in the fresh food display is in an open state.  

The sensor must be replaced at the earliest.

 

Samsung fridge error codes

Code Number Meaning Solution
 

1E, SE, 5E

 There is a power outage problem resulting in water or ice not getting dispensed. Press the Lightning and Energy Saver buttons together for 15 minutes.
 

86E, 85E, 83E, 88

 The fridge has a power loss problem. Unplug the fridge and plug it back again after a minute.
 

OF, 0F (Flashing)

 The fridge door is open causing Cooling OFF mode to be activated. Close the door of the fridge properly and wait for some time till the unit cools down.
 

PC ER

  

There is no sealing connection between the main unit and its door.

 Clean dust and/or debris from the door top and make sure that there is nothing very close to the door inside the fridge that stops it from closing.
 

26E

 The fridge has a bad ice maker or water valve. Turn ON the ice maker, change the water valve and clean the blockages.
 

40E, 24E

  

The freezer defrost is malfunctioning.

 Remove the back inner wall in the freezer and the food in it. Thaw the accumulated frost with a hair dryer.
 

25E

  

The refrigerator defrost is faulty.

 Check for the proper functioning of the control board and defrost timer and replace them if needed.
 

23E

 The fridge has a problem with the condenser fan. Check if the condenser fan of the fridge has a sufficient power supply and change it if this is not the case.

 

Why does my Whirlpool fridge keep beeping?

Your Whirlpool fridge keeps beeping because the evaporator fan has burnt out, an open door, or a faulty light switch. An unstable thermostat or a pending reset can also be the reason.

 

  1. Seek help from a certified technician to look out for a burnt-out evaporator fan and get it replaced if you find that this is the case.
  2. Make sure that the doors of the fridge, as well as the freezer,, are closed properly. You may have to reposition the items inside them for the doors to close properly.
  3. Check if the light inside the fridge or freezer is ON when there is a beeping sound. If so, the switch is ON and has to be changed.
  4. Look out for a high temperature in the fridge or freezer. If either of the sections has a high temperature, the thermostat is no longer stable and needs a replacement.
  5. Disconnect the fridge from the power supply and keep its door open for about five minutes. Reconnect the power supply and close the door when you hear a beep sound.

 

Why does my GE (General Electric) fridge keep beeping?

Your GE (General Electric) fridge keeps beeping due to an out-of-position or defective door seal, positioning the items inside, unbalancing, or a faulty temperature sensor.

 

  1. Unplug the fridge and open its door. Check for a door seal that has moved out of place and tuck it back in place using a flat screwdriver or your hand. If it shows signs of wearing out, get the seal replaced by removing the screws and taking off the door frame.
  2. Reposition the items inside the fridge so that it’s not overstuffed and the door is closed properly. You must ideally keep beverages in the top section, fruits, and vegetables in the middle section, and soups and other things in the bottom section.
  3. Make sure that the fridge is positioned on a level surface and isn’t tilted to one side. You can turn OFF the power connection to the fridge and check its level using a spirit level.
  4. Unplug the fridge and check the temperature sensor using a multimeter. You will have to take off the screws from the rear panel followed by the frame. If the temperatures of all the compartments are the same, the sensor is faulty and has to be changed.

 

Why does my LG fridge keep beeping?

Your LG fridge keeps beeping because the fridge door is open, the internal temperature of the fridge is very warm, there is bad ventilation or there is ice buildup in the freezer.

  1. Close the fridge door properly as an open door can affect its cooling function. A quick tap sound when you close the door ensures proper door shutting.
  2. Press the buttons on the fridge and the freezer continuously until the temperatures are the same as what is specified in the owner’s manual. These buttons are located on the control panel.
  3. Reposition the fridge to a different location if you’ve placed it too close to a heating appliance or a wall. This can cause blockage of the vents, thereby inhibiting air circulation.
  4. Look out for a damaged defrost timer that prevents the auto defrost function from working and causes ice buildups. Changing the sensor will fix the problem.

 

Why does my Frigidaire fridge keep beeping?

Your Frigidaire fridge keeps beeping due to a power failure, a high internal temperature, an open door, too less or too many items, or a faulty control board.

  1. If the beep occurs when there is a power failure, you can arrest the beep by pressing the Alarm Reset button.
  2. Check for blocked air vents that can trigger a high internal temperature in the fridge and clean them thoroughly to stop the beeping.
  3. Make sure that the doors of both the fridge and freezer are closed properly. A faulty door sensor that has to be changed can also prevent the proper closing.
  4. Too less or too many items in the fridge and/or freezer can affect its ability in maintaining a stable temperature. It’s recommended that you neither overstuff the fridge/freezer nor keep very less items in them.
  5. Check for damaged wiring in or burning out of the control board and get a trained technician to fix it for you.

 

Why does my Samsung fridge keep beeping?

Your Samsung fridge keeps beeping because the door is open for more than three minutes, obstructions in the path of the door, or dirty rubber seals or plastic fittings.

  1. If the fridge door is open for more than three minutes, the door alarm beep gets activated. The beep will stop automatically when the door is shut.
  2. Make sure that there aren’t any obstructions near the door that prevent it from closing properly. Avoid keeping anything too close to the door that impairs its ability to close properly.
  3. Clean the dirty rubber seals and plastic fittings of the fridge thoroughly to make sure that they are free of debris like grease and oil.

Related posts:

  1. Why Your Oven Keeps Beeping (and How to Stop It)
  2. (SOLVED) Why Dishwasher keeps Beeping and How to Stop it?

How to Vertically Mount GPU to a PC Case (STEPS)

Written by Ernie Lo in Computers Last Updated October 2, 2022

What is vertical GPU mounting?

Vertical GPU mounting is an alternate way of installing your graphics card apart from the standard horizontal mount. This type of mounting has a better appearance than the horizontal mount. The front panel of the GPU faces outwards rather than downwards as in the case of horizontal mounting. 

 

How do vertical GPU mounts work?

Some PC cases have a provision externally to support vertical GPU mounting. You will need a riser cable to connect the motherboard to the GPU. You can also buy a vertical mount to install the GPU vertically and ensure that it’s not too close to the side panel.

 

Does mounting your GPU vertically affect performance?

Yes, mounting your GPU vertically can affect performance if it’s not setup correctly. Vertically mounting your GPU tends to block the air vents because of its very close positioning to the panel. As a result, this can trigger airflow issues leading to the GPU overheating. 

 

This will also pave the way for thermal throttling and increased thermals. The clock speeds also get reduced drastically.

You can try out the following tips to fix the performance issues due to mounting the GPU vertically.

  1. Use a PC case with the provision to support the vertical mounting of the GPU. This feature is usually present on the outside of the case.
  2. Opt for a vertical GPU mount from a reputed manufacturer and fit the card into the mount.

 

Is vertical mount better for a GPU?

A vertical mount is better for a GPU if aesthetics or looks are of prime concern. This mount is also better for the GPU because it has some physical support. The support ensures that the motherboard is subject to less pressure.

  • Improvised aesthetics
  • Better physical support

 

Advantages of vertically mounting a GPU

Vertically mounting a GPU has a few advantages such as a good visual appeal, and effective use of RGB in the graphics card and is ideal for a custom-built PC. The vertical mounting style also does not pose a cooling problem for water-cooling PCs.

  • Good visual appeal
  • Effective use of RGB
  • Ideal for custom build
  • No cooling problem for water cooling PCs

 

Good visual appeal

The PC has a better appearance with a vertically mounted GPU. Expensive GPUs have a better look than standard ones and this can be visualized better with vertical mounting.

 

Effective use of RGB

Premium graphic cards come with customizable features such as RGB lighting. This customization can be done more easily with vertical mounting when compared to standard horizontal mounting.

 

Ideal for custom build

People who enjoy building their PCs tend to prefer a vertical mounting option for their custom-built PCs as the installation tends to be easy.

 

No cooling problem for water cooling PCs

In water cooling PCs, space between adjacent parts isn’t a problem because the cooling is done by water and not through airflow in the spacing between the parts. So, it doesn’t matter if the GPU gets positioned too close to the PC panel.

 

Is vertically mounting GPU bad?

Yes, vertical GPU mounting is bad if it isn’t done properly and certain factors aren’t taken into consideration. One drawback is that when the GPU is mounted vertically, it tends to block other parts of the PC and make them less visible. This can be a problem if you want to do a bit of troubleshooting. 

A vertically mounted GPU tends to take up more space than a horizontal mount. This is why it gets positioned too close to the panel and results in insufficient airflow. This results in the need for overclocking which eventually reduces the performance.

The lifespan of a vertically mounted GPU tends to get reduced compared to a horizontal mount. The shorter life means that you may have to keep changing the GPU more often.

 

vertically mounting a GPU to PC case

 

Vertical GPU mount Vs Horizontal GPU mount

A vertical GPU mount requires a PCIe riser cable for its installation. This cable can be expensive based on the brand, and you must ensure that you have a cable of the right length. The airflow inside the PC cabinet tends to get reduced, affecting the associated PC’s cooling profile. It’s possible to see the fans in operation. There is no chance of GPU sag as the installation is done with a GPU support bracket.

 

A vertical mounting position is recommended if you plan to overclock your GPU.

 

A horizontal mount is the default mounting style. The GPU is positioned such that there is sufficient air circulation. The heatsinks are exposed and the hot air dissipation occurs through both sides. The front panel of the graphics card faces downwards. There is the possibility of a GPU sag because of the lack of a supporting mechanism and the weight of the card.

You can use a vertical mount GPU card if you have one of those high-end graphics cards with RGB effects that you would like to enjoy when you watch a movie or play a game. This option is also recommended if you plan to build your PC or use a water-cooled PC, as airflow is of no significance with such a cooling mechanism. The thermal solutions for most GPUs are also optimized for horizontal mounting. As a result, a graphics card mounted this way often operates at 100% efficiency.

On the other hand, a horizontal mount GPU is recommended if you have a small PC cabinet and its cooling is done by means of air circulation. There will be considerable spacing between the graphics card and the PC panel so that there is considerable airflow. 

 

Why do I need to vertically mount my GPU?

You will need to vertically mount your GPU if it’s heavy. When a graphics card is heavy, it’s likely to sag. This possibility is ruled out when you mount the card vertically and there is no pressure on the PCIe card slot because of the weight. Another reason to vertically mount the GPU is to display the integrated RGB lighting in the graphics card without any obstruction by other components around it.

 

The tools needed to vertically mount a GPU are given below.

  • Riser cable – To connect the GPU to the motherboard
  • PCIe bracket with appropriate slots – To hold the GPU in position.
  • Screwdriver – To remove the screws holding the PCIe slot onto the motherboard

Alternatively you should consider buying a vertical GPU bracket kit that includes all the tools needed for vertical mounting.

 

How to vertically mount a GPU

You can vertically mount a GPU by removing the graphics card from its existing horizontal position and using the vertical mount plate as well as the riser cable for the vertical mounting.

The following steps offer a walkthrough on how to mount a GPU vertically onto the PC case.

1. Push the latch that locks the GPU onto the motherboard in the downward direction.

2. Release the graphics card from its slot on the motherboard.

3. Place the vertical mount into the case and tighten the screws with a screwdriver to secure the mount in place.

4. Connect one end of the riser cable to the vertical mount plate.

5. Connect the other end of the cable to the top PCIe slot.

6. Plug the GPU into the cable and screw it to hold it in place.

 

Best vertical GPU mounts

There are various manufacturers competing with one another to offer their vertical mounts for the GPU. While the list can be overwhelming and daunting, you can look up online reviews of a few mounts and use them as a reference to buy an ideal vertical GPU mount.

 

A list of some of the best vertical GPU mounts that are worth considering is given below:

  • Cooler Master Universal V2 Vertical GPU Holder Kit
  • Phanteks Gen4 Vertical GPU Bracket and Riser Cable Kit
  • Fractal Design Flex B-20 Vertical Graphics Card Bracket
  • Lian Li O11DMINI-1 Vertical GPU Bracket Kit
  • ASIAHORSE GPU Mount
  • LINKUP Vertical GPU Mount
  • EZDIY-FAB Vertical GPU Mount

 

How to vertically mount GPU to Corsair 4000d

The Corsair 4000d case comes with the provision for mounting a GPU vertically. There are two slots for vertical GPU mounting on the rear panel near the PCIe card positions. The GPU can be mounted onto these slots with a riser cable and appropriate vertical mounting hardware. 

Most users who prefer to mount their GPU to a Corsair 4000d case opt for either an EVGA 3070 Ti vertical mount or a Cooler Master Universal V2 vertical mounting kit. You can choose any one of them and do a screw mount to secure the GPU in position.

 

How to vertically mount GPU to Corsair 5000d

The Corsair 5000d case features a slot for the vertical mounting of a GPU. There is a drawback to using this slot if the graphics card is really thick. 

When such a GPU as the GeForce RTX 3070 Gamerock is fitted onto the dedicated slot, it is too close to the glass panel of the Corsair. In such cases, an external vertical kit is needed.

The steps outlined below illustrate how to vertically mount a GPU to the Corsair 5000d case that has dedicated positions at the rear for mounting in the vertical position.

1. Unscrew the small screw and the thumb screws that hold the plate over the slot for vertical mounting in place.

2. Take the SSD off from its place if it has been mounted in the front bottom panel.

3. Connect the PCIe riser cable in the correct position to the bottom of the case using two standoff screws and also plug it into the top slot present on the motherboard.

4. Fix the plate back and use two roundoff screws to keep it steady and hold it securely in place. The holes for these screws are on both sides of where the SSD is seated.

5. Insert the graphics card into the riser bracket located at the bottom of the case.

6. Lock the graphics card in place by screwing the thumbscrews back once again.

7. Connect the power cables in place.

 

How to vertically mount GPU to Meshify 2 Compact

The Meshify 2 Compact case supports vertical GPU mounting with the appropriate mounting kit. The Fractal Design vertical mount kit is a good choice for this mounting style. You will also need a 150mm long PCIe riser cable that bolts well into the bracket that comes with the kit. 

The Fractal Design B20 vertical mounting kit encompasses a mounting bracket that helps in better cooling of a graphics card like the RTX 3080 FTW3 vertically. The Meshify 2 Compact case has an inbuilt vertical mount that is quite close to the glass case. The B20 kit helps to overcome this problem along with very minimum sag.

 

How to vertically mount GPU to Lian LiO11 Air Mini

The Lian LiO11 Air Mini case can be fitted with a vertically mounted GPU using the O11DMINI-1 vertical GPU bracket kit from the same manufacturer. The vertical mount can be put in one of two ways. One way to do this is with clearance and the other way is to use it without bottom fans in the case. The first option is more often preferred.

The following steps offer a walkthrough of how to vertically mount a GeForce RTX 2060 GPU to the Lian LiO11 Air Mini case.

1. Turn OFF the PC and unplug the GPU.

2. Remove the screws on the sides of the GPU.

3. Use a screwdriver to push the tab on top of the GPU inwards.

4. Slide the GPU out of its position inside the case.

5. Remove the screws from the pane on which the GPU was fitted.

6. Insert one end of the PCIe cable into the appropriate slot in the motherboard.

7. Fit the GPU onto the mount and secure it in place by tightening the screws that come with the mount on either side.

8. Connect the other end of the cable to the GPU and push the GPU in till you hear a clicking sound.

9. Fit the mount onto the notches in the case designed for the same.

10. Use a screwdriver to tighten the screws that hold the mount in place on the case.

 

How to vertically mount GPU to Phanteks Eclipse P360A

The Phanteks Eclipse P360A case comes with the provision to mount a GPU vertically. The case supports the use of a PH-VGPUKT_02 vertical GPU bracket. This bracket can be fitted easily onto the slots in the PCI slot area by adhering to the instructions that come with the vertical bracket.

The steps mentioned here illustrate how to mount the GPU vertically to a Phanteks Eclipse P360A case.

1. Fasten one end of the PCIe riser cable to the bottom plate of the bracket using the screws provided and a screwdriver.

2. Mount the GPU onto the bottom plate and secure that in its place by tightening the screws at the top.

3. Remove the blanking plates from the case.

4. Connect the loose end of the riser cable to its slot in the case.

5. Tighten the screws on the bracket outside the case.

Related posts:

  1. How to Paint a PC Case (Complete Guide)
  2. Should I Upgrade My PC Case? (Complete Guide)

How To Fix a Roku TV that Won’t Change Input (STEPS)

Written by Ernie Lo in TV's Last Updated October 2, 2022

Why can’t I change the input source on my Roku TV?

The reason why you cannot change the input source on your Roku TV is because of outdated TV software, a faulty power supply or loose cable connections. Factory resetting the TV through the Roku menu will resolve this problem.

 

Possible Causes

  • Outdated software
  • Hardware issues in the TV
  • Loose cable connections
  • Non-functioning remote
  • No power on the TV

 

Outdated software

Smart TVs come with pre-installed software, which helps them perform various functions. Like your laptop’s and mobile phone’s operating systems, Roku TV’s software also needs regular updates. If you forget to install the available updates, you may observe some performance issues in your TV, and one of these issues could be your TV’s inability to act on the command sent by you.

 

Hardware issues in the TV

The internal wiring of the TV gets damaged over time. Since the wires are hidden, you may not notice them on time. However, when your TV starts acting up, you should know that this could be because of damaged wires. You should consult a technician to get the wiring checked – don’t try it on your own, as it could be dangerous.

 

Loose cable connections

If the TV is not connected to the power supply – the cable can get loosened –it will not pick up the instructions sent by you. Check the cables’ connection and tighten it, if needed.

 

Non-functioning remote

Pairing issues with the remote creates troubles for the TV. It fails to get commands from the remote, so the TV will not detect all things related to the input change. Pairing issues may be the result of external interferences in wireless signals. If you have too many electronic devices in the same room as your TV, you should turn them off and check again. Turn them on one by one to check which device is causing trouble.

 

No power on the TV

When the TV is low on power, it finds it difficult to pick up on the commands sent. Ensure that your TV is properly charged or connected to the power outlet.

 

Roku TV won't change input

 

How to fix a Roku TV that won’t change the input?

To fix a Roku TV that won’t change the input, opt for a factory reset or update the software. If nothing else works, try restarting the TV.

 

Factory Reset [Method 1]

  1. Press the Home button on the Roku remote.
  2. Go to Settings.
  3. Choose System.
  4. Click on Advanced system settings.
  5. Select Factory reset.
  6. Choose the Factory reset everything option.
  7. Follow the on-screen instructions.

 

Software Update [Method 2]

  1. On the Roku remote, press Home
  2. Look for Settings.
  3. Select System.
  4. Choose System update.
  5. Go to the Check now to manually check for the updates option.
  6. These steps will install the available updates.

 

TV Restart the TV [Method 3]

  1. Press the Home button five times.
  2. Press the Up arrow once.
  3. Press the Rewind button two times.
  4. Press the Fast Forward button two times.
  5. The TV will restart now.

 

Roku Remote Refresh [Method 4]

  1. From your Roku TV, remove the power cables.
  2. Take out the remote’s batteries.
  3. Plug the power cables back into the TV.
  4. The Home screen will now appear.
  5. Insert the batteries into the remote and wait for 30 seconds.
  6. The remote will now work.

 

Re-Pair Roku TV With Remote [Method 5]

  1. From your Roku TV, remove the power cables.
  2. Take out the remote’s batteries.
  3. Plug the Roku device back in.
  4. Let it boot.
  5. The Home screen will now appear.
  6. Insert the batteries back into the remote.
  7. Don’t put the battery cover back just yet.
  8. Press and hold the pairing button inside the remote’s battery compartment for 3 seconds, or until you see the pairing light on the remote.
  9. Wait for 30 seconds.
  10. When the remote is connected to the TV, its pairing dialog will appear on the screen.

 

How do you change the input on a Roku TV?

To change the input on Roku TV, go to home, choose settings, look for TV inputs, select each input. Then click setup input for all of your inputs.Wait for the dialog box to disappear.Go back to home.Now all inputs will appear there.Select one of them to change between inputs quickly.

 

Default Input [Method 2]

  1. Go to the Home screen.
  2. Select Settings.
  3. Choose System.
  4. Go to Power.
  5. Choose Power on.
  6. Select the input you want the TV to be in when it powers on.
  7. Save changes.
  8. Exit Settings.

 

How to change Roku TV input without the remote?

To change Roku TV input without the remote, you will have to download the Roku Mobile app on your phone.

To do this, follow the below steps:

  1. Connect the Roku TV and your phone to the same Wi-Fi network.
  2. Install the Roku Mobile app on your phone.
  3. Press Home on the Roku remote.
  4. Select Settings.
  5. Choose System.
  6. Click on Advanced system settings.
  7. Go to Control by mobile apps.
  8. Set Network Access to Default.
  9. Launch the Roku Mobile app on your phone.
  10. Follow the app’s instructions and connect to the TV.
  11. This connection will help you give commands to the TV through your phone.

 

How do I change the default input on my Roku TV?

To change the default input on your Roku TV, take your Roku remote and press the Home button. Then navigate to System and then Power (make sure it’s on), and select the input you want.

 

Why is my Roku TV input source stuck?

The reason your Roku TV input source is stuck could be because of hardware issues like a failed motherboard. Other reasons include malfunctioning and damaged wires and faults in TV cables. Software bugs also cause your Roku TV to get stuck.

 

Regular updates may resolve the issue. If the updates are not installed correctly, it will create some problems in the boot files.

Also, your TV may go through some display issues due to magnetic interferences. Turn off the electronic devices in the room to avoid such interference. If the TV has been on for prolonged periods, it may heat up quickly and show display issues. Don’t keep the device turned on for long hours, and do turn it off to give it some rest.

 

Here are some steps that you can follow to fix the issue:

 

Restart The TV [Method 1]

  1. Press the Home button five times
  2. Press the Up arrow once
  3. Press the Rewind button two times
  4. Press the Fast Forward button two times
  5. The TV will restart now

 

Power Cycle TV [Method 2]

  1. Turn off the TV
  2. Unplug the TV from the main power supply
  3. Remove all the peripheral devices connected to the TV
  4. Hold the power button on the TV for about 30 seconds
  5. Wait at least 15-30 minutes
  6. Plug in the TV
  7. Turn the TV on

 

Clear The Cache [Method 3]

  1. Press Home 5 times
  2. Press the Up button twice
  3. Press the Rewind button twice
  4. Press the Fast Forward button twice

 

Update The Firmware [Method 4]

  1. On the Roku remote, press Home
  2. Look for Settings
  3. Select System
  4. Choose System update
  5. Go to the Check now to manually check for the updates option
  6. This step will install the available updates

 

Why is the HDMI input not working on my Roku TV?

The reason the HDMI input is not working on your Roku TV is because of its malfunctioning HDMI cables. Another reason for this issue could be damaged TV ports. Any software bugs in the device may cause this issue as well.

 

To fix the issue, try these steps:

Check the HDMI Source [Method 1]

The first step you will have to take is to check whether the HDMI cable is fine. If it’s damaged, it needs replacement urgently. To check if the cable has any problem, you should connect it to another device.

If the cable doesn’t work, you should change it. Plug the new one with the TV and check if the device is working fine. Also, check if there is some dirt in the ports.

You can use an earbud to remove the dust (your TV should be powered off when cleaning the ports).

 

Factory Reset the TV [Method 2]

  1. Press the Home button on the Roku remote.
  2. Go to Settings.
  3. Choose System.
  4. Click on Advanced system settings.
  5. Select Factory reset.
  6. Choose Factory reset everything.
  7. Follow the on-screen instructions.

 

Why is the HDMI input grayed out on my Roku TV?

The reason the HDMI input grayed out on your Roku TV could be because of damaged cables. If you have another TV device, you should check its cable. Once it’s established that the cable is not the issue, you should try the factory reset option.

 

How to factory reset a Roku TV:

  1. Press the Home button on the Roku remote.
  2. Go to Settings.
  3. Choose System.
  4. Click on Advanced system settings.
  5. Select Factory reset.
  6. Choose Factory reset everything.
  7. Follow the on-screen instructions.

 

Why does my Roku TV say no signal when HDMI is plugged in?

The reason your Roku TV says no signal when HDMI is plugged in could be because of damaged HDMI cables, since they tend to cause display issues. Your Roku TV may show a no signal sign if the connected HDMI cable is bent or malfunctioning.

HDMI cables are prone to wear and tear and may get damaged quite easily and quickly. The best way to fix the issue is to get it replaced timely. Get a cable that is sturdy so that the internal wiring remains intact.

Related posts:

  1. How to Change the Input on My TV? (STEPS)
  2. How to Fix a Roku TV Black Screen (STEPS)
  3. Why Does My TV Keep Changing Input by Itself?
  4. How To Stop HDMI Input Popping Up on my TV Screen?

How to Stop my Mouse from Highlighting Everything!

Written by Ernie Lo in Computers Last Updated September 27, 2022

Why does my mouse keep highlighting everything?

The reason why your mouse keeps highlighting everything can be because of sticky keys turned on, a ClickLock setting is activated, outdated mouse drivers or having incorrect cursor settings.

 

Possible Causes:

  • Outdated Windows
  • ClickLock
  • Conflicting applications
  • Hardware issues
  • Improper cursor settings
  • Outdated drivers

 

Sticky keys

Sticky keys are an accessibility feature that allows people with disabilities to navigate properly without straining their fingers. You should turn off this feature if your mouse highlights everything on selection.

 

Outdated Windows

You must update your Windows regularly for optimal performance. When they are not updated, your computer will start acting weirdly. If your mouse selects everything when you click it, you should check if your Windows is updated.

 

ClickLock

This feature allows you to select objects without clicking on their buttons. If it is on, your mouse will continue highlighting objects without your command. It is a relatively new feature and allows users to drag icons and other items without mouse clicks.

 

Conflicting applications

Any third-party applications may disrupt your system’s performance, including the acting-up of the mouse. Ensure that all applications are updated. Also, install an antivirus app to get updated about the possible malware in your applications.

 

Hardware issues

Hardware issues in your mouse or the system can cause problems. You should disconnect the mouse and connect it to another system to see if it works fine. If it does, it means the problem lies in the system. You can use troubleshooting apps to see where the problem lies and fix it. If the mouse doesn’t work on the other system, you should get it replaced.

 

Outdated drivers

If your mouse’s drivers are not updated, it will perform unsatisfactorily. You should ensure that all updates are timely installed. You can install a third-party app for updating the drivers or can do so manually through the instructions provided by the manufacturer on their website.

 

Why is my mouse selecting everything when I click?

The reason your mouse is selecting everything when you click is because of hardware issues. You should connect your mouse to another system. If it works fine, your system has some underlying problems.

 

And if the mouse doesn’t work, it indicates that the device is damaged and needs a replacement.

 

mouse highlighting text

 

How do I fix my mouse highlighting everything in Windows 11?

To fix your mouse that keeps highlighting everything in Windows 11, you should update the mouse driver, disable ClickLock or fix your mouse’s blink rate value.

 

Update The Mouse Driver [Method 1]

  1. Click on Start.
  2. ChooseDevice Manager.
  3. Expandthe Mice and other pointing devices option.
  4. Right-click on the mouse.
  5. TapUpdate Driver.
  6. Select Search automatically for drivers.
  7. Install the drivers.

 

DisableClicklock [Method 2]

  1. Go to Start.
  2. Choose Control Panel. 
  3. Scroll down for the View by option.
  4. Set it to Large icons.
  5. Tap the Mouse option.
  6. Uncheck the Turn on ClickLock button.
  7. Click Apply.
  8. Click OK.

 

Mouse’s Blink Rate Value [Method 3]

  1. Go to the Start menu.
  2. Look for Control Panel.
  3. Select the View by option.
  4. Choose Large icons.
  5. Tap Keyboard.
  6. Change the blink rate to the desired one.
  7. When selecting, ensure that you have opted for a faster rate.
  8. Click Apply.
  9. Choose OK.

 

Mouse’s Double-Click Speed [Method 4]

  1. Select Start.
  2. Go to Control Panel. 
  3. Go to View by.
  4. Select Large icons.
  5. Choose Mouse.
  6. Go to Buttons.
  7. Slow down the Double-click speed.
  8. Click Apply.
  9. Choose OK

 

Change The Settings Of The Ease Of Access Center [Method 5]

  1. Select Start.
  2. Go to Control Panel. 
  3. Go to View by.
  4. Select Large icons.
  5. Choose Ease of Access Center.
  6. Tap Make the mouse easier to use.
  7. Uncheck Activate a window by hovering over it with the mouse. 
  8. Click Apply.
  9. Click OK.
  10. Go to Ease of Access Center again.
  11. Choose the Make the keyboard easier to use option.
  12. Uncheck the Turn on Sticky Keys option.
  13. Choose
  14. Click OK.

 

Clean Boot [Method 6]

  1. Hold the Win + R keys to open therun dialogbox.
  2.  
  3. Press Enter.
  4. Look for theGeneraltab.
  5. UncheckLoad startup items.
  6. Go to theServicestab.
  7. Select Hide all Microsoft services. 
  8. ClickDisable all.
  9. Restart the computer.

 

How do I fix my mouse highlighting everything in Windows 10?

To fix your mouse that keeps highlighting everything in Windows 10, try checking the mouse’s double click speed or change the settings of the ease of access center.

 

Update The Mouse Driver [Method 1]

  1. Click on Start.
  2. Choose Device Manager.
  3. Expand the Mice and other pointing devices option.
  4. Right-click on the mouse.
  5. Tap Update Driver.
  6. Select Search automatically for drivers.
  7. Install the drivers.

 

DisableClickLock [Method 2]

  1. Go to Start.
  2. Choose Control Panel. 
  3. Scroll down for the View by option.
  4. Set it to Large icons.
  5. Tap the Mouse option.
  6. Uncheck the Turn on ClickLock button.
  7. Click Apply.
  8. Click OK.

 

Mouse’s Blink Rate Value [Method 3]

  1. Go to the Start menu.
  2. Look for Control Panel.
  3. Select the View by option.
  4. Choose Large icons.
  5. Tap Keyboard.
  6. Change the blink rate to the desired one.
  7. When selecting, ensure that you have opted for a faster rate.
  8. Click Apply.
  9. Choose OK.

 

Mouse’s Double-Click Speed [Method 4]

  1. Select Start.
  2. Go to Control Panel. 
  3. Go to View by.
  4. Select Large icons.
  5. Choose Mouse.
  6. Go to Buttons.
  7. Slow down the Double-click speed.
  8. Click Apply.
  9. Choose OK

 

Change The Settings Of The Ease Of Access Center [Method 5]

  1. Select Start.
  2. Go to Control Panel. 
  3. Go to View by.
  4. Select Large icons.
  5. Choose Ease of Access Center.
  6. Tap Make the mouse easier to use.
  7. Uncheck Activate a window by hovering over it with the mouse. 
  8. Click Apply.
  9. Click OK.
  10. Go to Ease of Access Center again.
  11. Choose the Make the keyboard easier to use option.
  12. Uncheck the Turn on Sticky Keys option.
  13.  
  14. Click OK.

 

Clean Boot [Method 6]

  1. Hold the Win + R keys to open the run dialog box.
  2. Type msconfig.
  3. Press Enter.
  4. Look for the General tab.
  5. Uncheck Load startup items.
  6. Go to the Services tab.
  7. Select Hide all Microsoft services. 
  8. Click Disable all.
  9. Click Apply.
  10. Click OK.
  11. Restart the computer.

 

 

Why is a single click opening files?

The reason a single click is opening files on your computer is because of the mouse’s settings. To disable the option, you will have to use the control panel.

 

Use Control Panel [Method 1]

  1. Open Control Panel.
  2. Go to Appearance and Personalization.
  3. Select File Explorers Options.
  4. Click on the Single-click to open an item (point to select) option.
  5. Hit Apply.

 

The Search Option [Method 2]

  1. Open Start.
  2. Go to File Explorers Options.
  3. Select the Single-click to open an item (point to select) option.
  4. Click Apply.

 

Use Menu Bar [Method 3]

  1. Go to C: (local disk).
  2. Go to View.
  3. Select Options.
  4. Look for the Single-click to open an item (point to select) option.
  5. Select Apply.

 

These methods can work if you have Windows 11 installed. For those working on Windows 10, they should follow these steps:

  1. Go to Start.
  2. Search File Explorer Options.
  3. Go to the Double-click to open an item (single-click to select) option.
  4. Click Apply.

 

How do I make my mouse single-click Windows 10?

To make your mouse single-click on Windows 10,go to start, search file explorer options, go to the double-click option to open an item (single-click to select) option, click apply.

 

How to turn off single-click Windows 10?

To turn off single click on Windows 10,hold the Windows + X keys, go to Control Panel, choose File Explorer options. Then Select General Tab.Go to Click items as follows.Go to Double Click to open an Item.Hit OK.

 

Why is my mouse highlighting everything in Windows 11?

The reason your mouse is highlighting everything in Windows 11 is because the software version has a feature that allows users to drag and highlight icons without clicking on them. You can easily disable the ClickLock feature to avoid this issue.

 

Follow these steps to do so:

  1. Go to Start.
  2. Choose Control Panel. 
  3. Scroll down for the View by option.
  4. Set it to Large icons.
  5. Tap the Mouse option.
  6. Uncheck the Turn on ClickLock button.
  7. Click Apply.
  8. Click OK.

 

How do I make my mouse single-click Windows 11?

To make your mouse single-click Windows 11, press the Windows + R keys, type control folders, press Go to file explorer options and navigate to General. Go to single. And look for click items.

Then follow these steps:

 

  1. Go to Single-click to open an item (point to select).
  2. Choose it.
  3. There will be two options:
  • Underline icon titles consistent with my browser
  • Underline icon titles only when I point at them
  1. Select the one that you want.
  2. Click OK.

 

How to turn off single-click Windows 11?

To turn off single-click Windows 11, hold the Windows + X keys, go to Control Panel, choose File Explorer options,select General,go to Click items as follows, go to Double Click to open an Item, thec Click “OK”.

 

Method 2

  1. Press the Windows + I keys.
  2. It will open the Settings app.
  3. Go to the search box.
  4. Type click.
  5. Search for the options: Specify single- or double-click to open.
  6. Select it.

Related posts:

  1. How To Fix a Mouse that Won’t Scroll Up Or Down (STEPS)
  2. How to Fix a Mouse That Suddenly Stops Moving (STEPS)
  3. How to Fix a Mouse Left/Right Button Not Clicking (STEPS)
  4. Why Your GPU Fans Won’t Stop Spinning

(SOLVED) Why Does my LG TV Screen keep Freezing?

Written by Ernie Lo in TV's Last Updated September 24, 2022

Why does my LG TV keep freezing?

Your LG TV screen can suddenly start freezing because of a loose connections,  downloading large apps, or because the screen resolution settings are set too high.

 

Causes

  • Weak cable connections
  • Downloading heavy apps
  • High resolution settings
  • Overheating

 

Faulty cable connections

Faulty or loosely connected cables are the first thing you should check for when you run into this issue. Cables bridge communication between your LG TV and the peripheral devices you have connected to it. If this connection is weak, interrupted, or unstable, your TV will get overloaded with mixed signals that will cause its screen to glitch up and freeze.

 

Downloading heavy apps

If you’re updating your TV or downloading heavy files/ apps while using it, your screen might freeze. Why? Well, that’s because this makes your TV multitask heavy work. This will burden your TV’s processor, and if things get out of hand, it will cause your TV to freeze. Try not to perform other tasks on your TV while downloading heavy apps or files. This should prevent this problem.

 

High screen resolution

High screen resolutions can burden your TV’s backlight and cause it to freeze eventually. Your screen’s frame rate settings could also be the culprit here. Trying to render a lot of media fast can cause your TV screen to get stuck.

 

Overheating

Finally, Overheating is another possible reason that may be causing your TV’s freezing problem. When you use your TV for long hours consecutively without breaks, and when you keep it in a space that has little to no air circulation, your TV heats up. Consequently, all of the internal hardware will heat up as well- causing your TV to run slower until it eventually freezes.

 

LG TV screen freezing

 

How to fix an LG TV that keeps freezing?

To fix a freezing LG TV screen, do a cable reset, give your TV ample time to cool down and reduce your TV’s screen resolution.

 

Cable reset

Here’s how you can quickly cable-reset your TV to get it to stop freezing:

  1. Power off your TV from the main switch
  2. Start removing all cables connected to your TV one-by-one
  3. After this, check each cable (and cable port) for signs of damage
  4. Replace damaged equipment
  5. Clean your TV’s cable ports and free them of any dust or debris
  6. Re-attach all cables to your TV
  7. Turn on your TV to see whether the issue got fixed.

 

Stop Multi-tasking

If you notice that your TV is freezing (or running slower than usual) while you’re multitasking, stop multitasking immediately. Burden your TV with one heavy task at a time; otherwise, you will risk getting its screen frozen. This will also help keep your TV cooler.

 

Give your TV time to cool down

Cool down time is super-important if you want to stop your TV from overheating. When using your TV for long hours, just remember to give your TV rest for a bit by switching off power from the main supply. This will also help you reduce the strain on your eyes and connect back to the real world. Another good way to ensure that your TV doesn’t overheat is by keeping it somewhere there is good air ventilation.

 

Lower down screen resolution

Here’s a quick guide on how to lower your TV’s screen resolution:

  1. Press the home button on your LG TV’s remote
  2. Go to setup
  3. Find and click on Display settings
  4. Find the screen resolution settings and lower them down.

 

How do I stop my LG TV from freezing?

To stop your TV from freezing, either cable reset your device, power reset it, or factory reset it.

 

Cable reset

  1. Power off your TV from the main switch
  2. Start removing all cables connected to your TV one-by-one
  3. After this, check each cable (and cable port) for signs of damage
  4. Replace damaged equipment
  5. Clean your TV’s cable ports and free them of any dust or debris
  6. Re-attach all cables to your TV
  7. Turn on your TV to see whether the issue got fixed.

 

Power rest

  1. Turn your TV’s power switch off
  2. Replace the battery of its remotes if you need to
  3. Press and hold down the power button below your LG TV’s screen for 20 – 30 seconds.
  4. Release the power button and let your TV stay unplugged for about 25 minutes.
  5. Now, plug your TV into the power again and turn it on.

 

Factory reset

  1. Press the home button on the remote to open the menu
  2. Head towards the settings
  3. Find and click on support
  4. Go to reset and select and confirm factory reset.

 

Why does my LG TV keep freezing and restarting?

Your LG TV keeps freezing and restarting either due to a glitch or because its mainboard is damaged.

 

Random glitches

Sometimes, unexplained glitches can cause your TV to get stuck in a booting loop. Restart your TV to resolve this issue.

 

The main board is damaged.

Alternatively, your TV’s refusal to start up properly may also be because its main board is damaged. Your TV’s main board is like its brain. If this part deteriorates, your TV won’t operate properly.

 

What do I do when my LG TV is frozen and won’t turn off?

Hold down the volume and power keys on your TV for at least 15 seconds to reboot a LG TV that freezes and won’t turn off.

 

Re-boot your TV

Rebooting is simple. All you need to do is walk over to your TV and press down on the power and volume buttons for at least 15 seconds (or until you see the LG boot-up logo). Let your TV reboot, and then check if the issue has been resolved.

 

Restart your TV

Turn off your TV’s power for a couple of minutes, and then open it up again to see whether the glitch goes away.

 

How do I reset my LG smart TV?

There are three options when it comes to resetting your TV: a simple restart, a soft reset, and a factory reset.

 

Simple restart

To conduct a simple restart, all you need to do is switch your LG TV off using the remote, unplug it from the power supply, wait about a minute or two, re-plug the power cord, and then turn your TV on.

 

Soft reset

  1. Turn your TV’s power switch off
  2. Replace the battery of its remotes if you need to
  3. Press and hold down the power button below your LG TV’s screen for 20 – 30 seconds.
  4. Release the power button and let your TV stay unplugged for about 25 minutes.
  5. Now, plug your TV into the power again and turn it on.

 

 

Factory reset

  1. Press the home button on the remote to open the menu
  2. Head towards the settings
  3. Find and click on support
  4. Go to reset and select and confirm factory reset.

 

Why does my LG TV keep lagging?

Your TV is lagging either because it is overheating or because you’re multitasking heavy work on it.

 

Overheating

Overheating happens either because you’ve kept your TV in a boxed space or because you’ve been using it for hours without any breaks. Overheating can eventually cause your TV to lag and, if left unchecked, can even damage your TV’s sensitive internals permanently.

 

Multitasking

Multitasking (especially when you’re doing heavy work) can burden your TV’s main board a lot. This will result in your TV heating up and running significantly slower.

 

How do I fix my LG TV, which keeps Lagging?

Close extra background apps and give your TV cooling breaks between long use to prevent it from lagging.

 

Close extra apps

TVs are not the best devices for multitasking. If you try to download heavy files while running high-resolution display settings, you’ll need to strap in for a bumpy user experience.

 

Cooling breaks and air-circulation

Keeping your TV cool at all times is super important if you want to prevent overheating damage. This will also prevent your TV from lagging due to overheating internals.

 

How do I fix an LG TV stuck on the Logo screen?

To stop your TV from being stuck on the Logo screen, either conduct a soft reset or a factory reset.

 

Soft rest

  1. Turn your TV’s power switch off
  2. Replace the battery of its remotes if you need to
  3. Press and hold down the power button below your LG TV’s screen for 20 – 30 seconds.
  4. Release the power button and let your TV stay unplugged for about 25 minutes.
  5. Now, plug your TV into the power again and turn it on.

 

Factory reset

Here is what you need to do to reset your TV to its default settings (note that you should only do this if you’re ready to lose all of your saved apps and data).

  1. Press the home button on the remote to open the menu
  2. Head towards the settings
  3. Find and click on support
  4. Go to reset and select and confirm factory reset.

 

Why does my LG TV get stuck on YouTube?

The YouTube app gets stuck on your LG TV either due to glitches or because the Wi-Fi isn’t working.

 

Here’s how you can resolve these issues:

 

Simple restart

Conducting a simple restart should help you get rid of any TV-caused glitches with YouTube. All you have to do is remove the power cord from the socket, wait for a minute and then plug your TV back in.

 

Wi-Fi restart

If restarting your TV doesn’t fix the problem, then maybe your internet connection is at fault. Try restarting your Wi-Fi router and check whether you’re getting good internet signals.

 

Re-install the app

If nothing works, then it might just be a glitch with the app. In this case, you should try uninstalling and then reinstalling your YouTube app. This usually fixes all bugs that were causing your app to glitch.

 

Why does my LG TV freeze on Netflix?

The Netflix app freezes on your TV either due to a glitch with the app or because of a glitch with your device.

 

Restart your LG TV

Conducting a simple restart should help you get rid of any TV-caused glitches with YouTube. All you have to do is remove the power cord from the socket, wait for a minute and then plug your TV back in.

 

Sign out and sign in again

If restarting your TV doesn’t work, try signing out of Netflix and then signing in again. This sometimes helps you get rid of any account-related glitches.

 

Uninstall the app

Another reason why Netflix might be freezing could be due to some bug in the app. In this case, you should try uninstalling and then reinstalling your Netflix app. This usually fixes all bugs that were causing your app to glitch.

Related posts:

  1. (SOLVED) Why does my TV Screen Keep Flashing Black?
  2. How to Fix Fire TV Stick that Keeps Pausing and Freezing
  3. (SOLVED) Why Does my LG TV keeps Switching OFF?
  4. (SOLVED) Why Does my TCL TV Turn OFF by itself?

How to Stop a Sony TV from shutting off automatically

Written by Ernie Lo in TV's Last Updated September 23, 2022

Why My Sony TV keeps shutting down

Your Sony TV can keep on shutting down randomly because of a power failure, an overheating issue, or because of a faulty backlight.

 

Causes

  • Power failure
  • Overheating
  • Deteriorated/ faulty backlight

 

Power failure

No matter what the causing factor is, if your TV isn’t getting sufficient and stable power, it will not operate properly, and if the issue becomes severe enough, it will result in your TV shutting down mid-use. While there are several factors that can cause your TV to run short on power, the most commonly reported ones are a loose power plug, problems from the main electricity supplier, and a damaged/ faulty cable.

 

Overheating

Your TV is built to endure long hours of use. However, if you use it for heavy work without giving it any breaks, it will start heating up from the inside. This is especially true if you’ve kept your TV somewhere there is little to no air ventilation.

 

Overheating can cause serious problems for your TV if left unchecked. If the heat keeps piling up inside your TV, it will damage other sensitive internals, i.e., your TV’s mainboard or the backlight panel- resulting in high repair/ replacement costs.

For this reason, when your TV overheats to a certain point, your TV shuts off automatically to prevent further heating. Hence saving it from heat damage.

 

Deteriorated/ faulty backlight

Whether it’s overheating that causes your backlight to get damaged or excessive force- the effect remains the same- your screen will go black. This is because backlight panels produce the visuals you see on your TV screen, so if that gets damaged, you will see nothing on the screen- giving the appearance that the TV has powered down.

 

Sony TV shutting off

 

How can I stop a Sony TV that powers down randomly?

You can stop your TV from powering down randomly by power resetting it, keeping it cool, or calling Sony’s Tech Support for help.

 

Soft reset

  1. Unplug your TV from the main power socket
  2. Press down on the power button beneath the screen and hold it for at least 40 seconds
  3. Release the button and leave your TV alone for 40 minutes
  4. Re-plug the power cord
  5. Turn your TV on

 

Keep your TV cool

The best way to keep your TV cool – even through long hours of usage- is by keeping it in a place with good air circulation and giving it enough cool down time in between use. This will protect your TV’s internals and save your eyes from strain.

While your TV won’t need cool down breaks between each long usage, it will need regular breaks if you’re putting it through a heavy workload.

 

Call Sony’s tech support.

With a damaged backlight, your only option is to call tech support and get them to look at your Sony TV. Tech support will tell you whether your TV can be repaired or replaced (and whether you are eligible for a warranty).

 

So, ensure that you call Sony’s official team first. If you’re not eligible for a warranty, you may also call your trusted technician for the job.

 

 

Reasons why Sony TV’s backlight goes dark?

Sony TV’s backlight goes dim either due to sleep timers or because ambient-light detection failed.

 

Sleep timer

If you set a sleep timer in your TV’s settings by accident, or if someone else using your TV sets it without your knowledge, your TV will confuse you when it randomly turns off when the timer is out.

 

So, if your TV’s backlight goes dark randomly, turn it back on to check whether there is a sleep timer activated in the settings.

 

Ambient light detection

Ambient light detection is the feature that enables your TV to auto-adjust its screen’s brightness.

Your TV detects how much light is in its surroundings, matches the brightness of the screen in accordance with it (so that it is bright enough for you to see but not so bright it strains your eyes), and saves energy in the process.

However, if it errors while detecting ambient light, the backlight and display will go dim, and the screen will appear almost entirely blacked out.

 

How to turn on Sony TV’s backlight?

You can light your TV’s backlight on again by toggling off the sleep timer in the settings and by switching off auto-brightness settings.

 

Manually adjust brightness

  1. Go to menu
  2. Go to settings
  3. Go to display and sound
  4. Find and click on picture settings
  5. Find the light sensor option and turn it off.

 

Remove all screen timers.

  1. Press the home button on the remote
  2. Use the arrow keys to navigate to settings, and then click on system settings.
  3. Scroll down to find click timers, click on it, and then find screen timers
  4. Turn off your screen timer or extend its duration.

 

Why do Sony TVs Turn off on their own?

Your TV turns off on its own because of cable problems or because its firmware version is outdated.

 

Causes

  • Old firmware
  • Loose cable connections

 

Old firmware

Firmware updates improve on the bugs and faults of previous versions. If new updates are available, and you keep using older firmware versions, your TV is bound to be bothered by the bugs of that version.

Most TVs today will come with automatic update settings, but if you’ve switched them off, you will have to manually update your TV each time an update is released.

 

Loose cable connections

Loose cable connections send mixed signals to form external devices to your TV’s main board. If your issue gets severe enough, they can even confuse the TV about whether there are external devices connected at all.

The mixed signals sent by these cables result in your TV turning off randomly.

 

How to prevent a Sony TV from turning off by itself?

To prevent your TV from turning off by itself, either check its cables or install the latest software version.

 

Update firmware version

When new updates are available and your TV has a Wi-Fi connection, you will see a notification on your TV that reads “? (Help).”

 

When this happens, follow these steps to update your TV’s software.

  1. Click on the “? (Help)” notification
  2. Find “customer support” and click on it
  3. Go to the software updates section
  4. Select network (optional)
  5. Click on the new update and click Install now.

 

Re-attach cables

Here is the process you need to follow:

  1. Use the remote to turn off your TV
  2. Then, switch off the wall socket to cut your TV’s power.
  3. Pull out all cables connected to your TV
  4. Clean all cables and their respective ports, and check both for any signs of damage/ deterioration.
  5. If you find that any deterioration has occurred, have that part replaced.
  6. Turn on your TV the regular way and see if the problem remains.

 

 

My Sony TV’s screen flashes/ blinks when I turn it off- Why?

Your TV’s screen flashes right before you power it off due to cable connectivity issues. Reset all cable connections to resolve this problem.

 

Cables delegate signals from your TV’s peripheral devices to the main board. Your mainboard interprets these signals and tells the screen what to display.

 

However, if the cable connection is faulty, this bridging of information will be unstable. Meaning that your mainboard will have a hard time figuring out whether there is an external device connected to the TV and, if so, what it is trying to say.

 

Resetting all cable connections while facing such a problem is a great way to resolve your issue.

  1. Use the remote to turn off your TV.
  2. Then, switch off the wall socket to cut your TV’s power.
  3. Pull out all cables connected to your TV.
  4. Clean all cables and their respective ports, and check both for any signs of damage/ deterioration.
  5. If you find that any deterioration has occurred, have that part replaced.
  6. Turn on your TV the regular way and see if the problem remains.

Related posts:

  1. Why Does my Sharp TV keep Shutting OFF by itself?
  2. How to Fix a Sony TV Screen that Keeps Flickering
  3. How to Fix a Sony TV Black Screen
  4. How To Fix Sony TV Blinking Lights (STEPS)